{"id":1639,"date":"2018-09-13T08:46:42","date_gmt":"2018-09-13T07:46:42","guid":{"rendered":"https:\/\/litzclip.com\/?p=1639\/"},"modified":"2025-12-19T12:12:03","modified_gmt":"2025-12-19T11:12:03","slug":"connect-electric-fence-conductive-material-in-30-seconds","status":"publish","type":"post","link":"https:\/\/litzclip.com\/en\/connect-electric-fence-conductive-material-in-30-seconds\/","title":{"rendered":"Video: Connect electric fence conductive material in 30 seconds"},"content":{"rendered":"

When setting the tension of new conductor material or when constructing or converting pasture fences, the conductor material must be connected to the fence posts in some way or another.<\/span><\/p>\n

Fence connectors<\/a> made of stainless steel into which the conductor material is clamped by means of screws are widely used for this purpose. Of course this works, but you always need a screwdriver on hand and it takes precious time to tighten the screws. This action is then repeated every time you need to re-tension the line: Open the screw(s), retension, and tighten the screw(s) again.\u00a0With fence connectors from Litzclip\u00ae<\/a>, however, you do not need any tools and Litzclips\u00ae are installed within 30 seconds. No joke!<\/span><\/p>\n

Connect the conductor material with Litzclip\u00ae<\/h2>\n

Litzclips\u00ae are available as a wire strand connector<\/a>, rope connector<\/a> and tape connector<\/a>. They consist of a small, stamped stainless steel plate into which the conductor material is inserted and two plastic caps with which the two ends are fixed. This keeps you safe and guarantees, above all, the current continuity, as the conductor material is held tightly against the stainless steel by the pressure of the plastic caps. You can see just how easy and fast it is in the following videos.<\/span><\/p>\n

Instructions for connecting a Litzclip\u00ae to wire strand and rope<\/span><\/p>\n